What is Clear & Colour Anodising?
- Choice of natural or over 40 colours and shades
- Highly decorative
- Up to 20 microns
- Semi hardness to aluminium
- Matt and gloss finish available
Anodising to aluminium provides a corrosion resistant finish coupled with
increased aesthetic qualities.
Applications include architectural (railings and framework etc.), motor industry, boating industry, hospitality industry, electronics and artistic applications. In general any items which require medium level corrosion resistance performance with aesthetic qualities.
Some examples are camera housings, motor cycle parts, clock faces for designer clocks, stair rails, ice buckets, planters and cups, visible boat parts and electronic switch devises and panels.
We can not anodise cast parts on motorbikes unfortunately, the characteristics that make good castings are not necessarily the best for anodising. Alloys with the best casting characteristics are those containing up to 12-percent silicon. High-silicon alloys do not anodise well because silicon is not readily soluble in aluminum. Only the aluminum on the surface of the part anodises, leaving areas with higher silicon unanodised and the entire part with a black or gray silicon powder.
To DEF 151, Type B AS 2039
- Black - 1200 x 1000 x 900
- Blue - 800 x 800 x 800
- Red - 850 x 950 x 850
- Gold - 580 x 800
- Violet - 950 x 650
- Bordeaux - 400 x 800
- Green - 400 x 800
These dimensions are intended only as a guide. Other shades and colours vary in tank sizes. Please telephone for specific requests. For large quantity and/or ongoing job lots,job specific tanks may be possible.
**For best anodising finish we suggest 6000 series aluminium**
What is Alodine Chromate Coversion Coating?
800 x 800 x 800
Used on electronic components to increase conductive qualities and corrosion resistance.
What is Hard Anodising?
- Hardens coating of alloy to the strength of tool steel
- Melting point 650°C
- Up to 200 microns
The coating provided by the Hard Anodic Oxidisation process can vary from a dull to a polished finish. The coating has many applications due to its inherent properties which include abrasion, erosion and corrosion resistance as well as electrical insulation.
To DEF 151, Type B AS 2039To MIL 8625/F Type 3
1500 x 1100 x 1100
Hard anodised components can be used in many applications previously considered unsuitable for aluminium. Examples include reciprocation and sliding parts, bearing cylinder heads, firearm components, pump parts, brake cylinders, sub sea equipment and packaging equipment. Highly recommended for use in harsh environments.
NOTE: We can not colour hard anodise aluminium parts.
Call AAEP Pty Ltd on 08 9495 4995 or send an email to firstname.lastname@example.org to see if we can help you with your anodising needs. For a quote you can send drawing and/or photo and/or description (make sure to note dimensions, weight, material and type of plating required etc).